Saddle Flooring Systems are patented dry floating floors which provide an easily levelled understructure for supporting chipboard plywood and hardwood flooring.
They can be used in domestic and commercial applications and can also contribute significantly to the acoustic performance of floors.The unique innovative packing system provides an easy and accurate method of levelling a timber floating floor over an uneven subfloor.

 

The Saddle System contributes significantly to the reduction of impact and airborne sound through party floors. It complies as an FFT2 floor in many Robust Detail floors and Scottish Section 5 Example Constructions.

 

 

  • FFT2 compliant for many Robust Detail floors
  • Quick and easy levelling of uneven floors
  • GWP of resilient layer is 0
  • Effective reduction of impact and airborne sound
  • Eliminates wet trades
  • Weight saving compared to screeds can reduce foundation costs
  • PEFC or FSC Chain of Custody
  • Provides void for services insulation or underfloor heating.

Karma Saddle System

  • 1. The basic system height without packing should be able to fit between the high point in the subfloor and the desired Finished Floor Level (FFL). Packers and, where necessary, elevating blocks are then used to level out areas below the high point.

     

    2. To calculate the basic system height determine the size of the void needed beneath the floor boarding by considering the height of services which will run in the void. Remember that service pipes may need space to cross over each other and that in the worst case this could occur at the high point of the tolerance in the subfloor. Add the thickness of the preferred floor boarding to give the basic system height. (N.B. If the floor is to comply
    with Robust Details the void allowed must be at least 50mm.)

     

    3. Double check that the basic system height at the high point will marry in with other fixed points in the building such as stairs, corridor screed levels or the thresholds of patio doors.

     

    4. From the table below select the basic system height and floor boarding closest to (but not more than) your needs. Packing will make up any difference.

    The above table is based on a Uniformly distributed load of 1.5kN/m2 and Concentrated load of 1.4kN as specified for self contained, single family dwelling units in BS6399-1:1996. Exceptional loads (such as storage heaters) may require support direct from the subfloor. It is also recommended that in high load areas such as kitchens and bathrooms support bearer centres are reduced to 300mm. Communal areas in blocks of flats such as corridors and vestibules will require special consideration. CMS Danskin can provide centres for other floor boarding and types of use.

  • Quietstone Supplies products are normally available on a 2-3 working day turnaround once the order is processed, However please ensure to check with one of our technical team as turnaround times can vary.

     

    Please ensure that when ordering, the delivery location is accessible by large and articulated vehicles as some of our products will be delivered in this way, If you require additional information to be added to ensure the delivery is succesful, please ensure to tell one of our technical team on placing the order as Quietstone Supplies will not be held responsible for failed delivery attempts and additional fees for redelivery may be applied

     

    Due to insurance guidelines, delivery personnel are unable to enter private residences. Delivery will be as far as possible to the kerbside of the delivery address. The recipient of the products is responsible for any additional lifting once the delivery has been made. Please bear in mind that Insulation products can be bulky and / or heavy.

Quietstone (UK) Ltd

Nab Quarry, 

Pott Shrigley, 

Macclesfield, 

Cheshire, 

SK10 5SD

Need advice on your project?

  • LinkedIn Social Icon